check_ibm_flex/flex_blade_blowers

90 lines
2.8 KiB
Python

#!/usr/bin/python
# -*- encoding: utf-8; py-indent-offset: 4 -*-
# SpearHead Systems
# The BLADE-MIB is somewhat goofy redarding the blower
# information. The blowers are listed sequentially
# below the same subtrees:
# BLADE-MIB::blower1speed.0 = STRING: "50% of maximum"
# BLADE-MIB::blower2speed.0 = STRING: "50% of maximum"
# BLADE-MIB::blower1State.0 = INTEGER: good(1)
# BLADE-MIB::blower2State.0 = INTEGER: good(1)
# BLADE-MIB::blowers.20.0 = STRING: "1712"
# BLADE-MIB::blowers.21.0 = STRING: "1696"
# BLADE-MIB::blowers.30.0 = INTEGER: 0
# BLADE-MIB::blowers.31.0 = INTEGER: 0
#
# The same with -On:
# .1.3.6.1.4.1.2.3.51.2.2.3.1.0 = STRING: "49% of maximum"
# .1.3.6.1.4.1.2.3.51.2.2.3.2.0 = STRING: "No Blower"
# .1.3.6.1.4.1.2.3.51.2.2.3.10.0 = INTEGER: good(1)
# .1.3.6.1.4.1.2.3.51.2.2.3.11.0 = INTEGER: unknown(0)
# .1.3.6.1.4.1.2.3.51.2.2.3.20.0 = STRING: "1696"
# .1.3.6.1.4.1.2.3.51.2.2.3.21.0 = STRING: "No Blower"
# .1.3.6.1.4.1.2.3.51.2.2.3.30.0 = INTEGER: 0
# .1.3.6.1.4.1.2.3.51.2.2.3.31.0 = INTEGER: 2
#
# How can we safely determine the number of blowers without
# assuming that each blower has four entries?
# We assume that all blowers are in state OK (used for
# inventory only)
def number_of_flex_blowers(info):
n = 0
while len(info) > n and len(info[n][0]) > 1: # state lines
n += 1
return n
def inventory_flex_blade_blowers(info):
inventory = []
n = number_of_flex_blowers(info)
for i in range(0, n):
if info[i + n][0] != "0": # skip unknown blowers
inventory.append( ("%d/%d" % (i+1,n), None, None) )
return inventory
def check_flex_blade_blowers(item, _no_params, info):
blower, num_flex_blowers = map(int, item.split("/"))
text = info[blower-1][0]
perfdata = []
output = ''
state = info[blower-1 + num_blowers][0]
try:
rpm = int(info[blower-1 + 2*num_blowers][0])
perfdata += [("rpm", rpm)]
output += 'Flex Speed at %d RMP' % rpm
except:
pass
try:
perc = int(text.split("%")[0])
perfdata += [("perc", perc, None, None, 0, 100)]
if output == '':
output += 'Flex Speed is at %d%% of max' % perc
else:
output += ' (%d%% of max)' % perc
except:
pass
if state == "1":
return (0, output, perfdata)
else:
return (2, output, perfdata)
check_info["flex_blade_blowers"] = {
'check_function': check_flex_blade_blowers,
'inventory_function': inventory_flex_blade_blowers,
'service_description': 'IBM Flex Blower %s',
'has_perfdata': True,
'snmp_info': ('.1.3.6.1.4.1.2.3.51.2.2', [3]),
'snmp_scan_function': \
lambda oid: re.match('IBM Flex Chassis Management Module', oid(".1.3.6.1.2.1.1.1.0")) != None,
}